Email Support With Us On support@neatcellpen.com
Neatcellpen.com
Tabs
Information
Our experience with laser tattoo removal treatments began in 2001.The laser delivers light at incredibly
fast speeds onto the skin. This laser energy, when aimed at tattoo ink, harmlessly passes through the layers of
skin to disrupt the ink and break it up into tiny particles.
Once the tattoo ink is broken up,the body absorbs the ink naturally and the tattoo fades away.
Unlike traditional laser removal technology – the Pico Laser won’t burn you,
allowing you to slowly fade your blemishes as part of your normal home routines.
The Picosecond Laser Pen utilizes FDA-approved & clinically validated technology laser for tattoo removal,
laser freckle removal, and another melanin removal.
Usage Guide
1. Plug in the power, allow the device to power on, the digital screen will display when complete.
2. Press the “Inten” and “Fre/Hz” button to select the intensity and frequency. We suggest to start the operation from the lowest intensity and frequency, then upgrade as needed. Note: level 9 is lowest frequency for Blue laser pen.
3. Wear protective glasses (included) Note: It is recommended to wear protective glasses with the blue laser due to the rapid flashing. Ear protection is optional due to loud beeping sounds.
4. Put the hole of the pen towards to the spot where you want to operate on. Note: for blue laser pen, we suggest that you DO NOT stay in the same location for more than 2 seconds.
5. Cover the area with repair essence or healing lotion / cream after the operation. Repeat to use repair essence in the following days. Do not expose to the sun, otherwise the skin will become sunburned and turn red.
6. Repeat these steps every few days if needed
2. Press the “Inten” and “Fre/Hz” button to select the intensity and frequency. We suggest to start the operation from the lowest intensity and frequency, then upgrade as needed. Note: level 9 is lowest frequency for Blue laser pen.
3. Wear protective glasses (included) Note: It is recommended to wear protective glasses with the blue laser due to the rapid flashing. Ear protection is optional due to loud beeping sounds.
4. Put the hole of the pen towards to the spot where you want to operate on. Note: for blue laser pen, we suggest that you DO NOT stay in the same location for more than 2 seconds.
5. Cover the area with repair essence or healing lotion / cream after the operation. Repeat to use repair essence in the following days. Do not expose to the sun, otherwise the skin will become sunburned and turn red.
6. Repeat these steps every few days if needed
- The laser beam can effectively resolve melanin into fine particles, to promote skin metabolism and reduce melanin deposits.
- NeatCellPen leaves no scars and leaves your skin looking natural.
- NeatCellPen is designed for safety, including no side effects, tested by professionals.
- See results fast, after a few treatments.
- NeatCellPen does not cause cancer
- Suitable for home, beauty salon, and training center use.
- Faster laser beam and more focused laser energy to clean and remove long-standing melanin problems
- More powerful laser beam, causes no damage to skin tissues and clean more comprehensively.
- The laser beam of the Picosecond Laser Pen can effectively resolve melanin into fine particles, to promote skin metabolism and reduce melanin deposits.
- NeatCellPen removes moles, lentigo, skin tags, black acne scars, tattoos, eyebrow tattoos, eyebrow microblading, and any other melanin.
- The power and effect of the blue light picosecond pen is stronger, it requires a more professional operation. It is recommended to wear goggles (goggles are included). You have to press the switch button when using the blue pen, while you don’t have to for the red laser pen.
- Red light: pulse 1-88j/cm2power 1600W wavelength 755mm
- Blue light: pulse 1-88j/cm2 power 1500W wavelength 755mm
- The blue laser pen has 9 output modes, different output frequency and wavelength. Note: level 9 is lowest frequency for blue laser pen
- The red laser pen has 3 output modes, continuous output, Interval 1-3 seconds output and Interval 5-7 seconds output.
- If you have a black colored tattoo, its best to use the red picosecond laser pen. If it is a more colorful tattoo, its best to use the blue picosecond laser pen.
- The Red light picosecond pen is for personal home use, you can operate it by yourself. Its power and effect is smaller than the blue light.
- The Blue light picosecond pen is for beauty salon use or if someone can help you operate it.
- Both colors can remove moles, lentigo, black acne scars, tattoos, eyebrow tattoos, eyebrow microblading and any other melanin.